Bellevue · WA
Chimney sweep and repair in Bellevue
Postwar and modern chimneys, from Crossroads to the newer eastside subdivisions.
No obligation. Someone answers every day, 7 a.m. to 9 p.m.
The short answer
Bellevue’s chimney stock skews newer than Seattle’s, and the calls skew with it: fewer crumbling 1920s crowns, more factory-built metal chimneys that need a cap replaced, a chase resealed or a liner cleaned before winter. Nation Wide Chimney Sweep&Repair runs the same sweep-inspect-repair sequence here as everywhere in the twenty-mile radius, adjusted for what actually fails on a Bellevue chimney — the postwar subdivisions around Crossroads and Lake Hills lean on masonry fireboxes with metal flues above the roofline, while newer construction east toward Eastgate and Newport Hills runs factory-built systems end to end that need manufacturer-matched parts, not a generic universal cap.
Local specifics
What is true about Bellevue
- 01
The postwar housing boom that filled Crossroads and Lake Hills followed Bellevue’s 1953 incorporation, when cheap land and new highway access pulled subdivisions across the floating bridge from Seattle through the 1950s and 1960s.
- 02
Wilburton, an old logging camp before Bellevue annexed it in 1967, and Crossroads, farmland worked by Japanese immigrant families until the 1942 internment cleared it for postwar housing, both carry a different chimney profile from Bellevue’s newer east-side subdivisions.
- 03
Bellevue sits inside the same Puget Sound Clean Air Agency jurisdiction as the rest of King County, so a winter burn ban on wood-burning fireplaces and uncertified stoves applies here exactly as it does in Seattle, regardless of how new the chimney is.
Housing stock
What the housing stock means for the chimney work
Bellevue’s housing runs newer on average than Seattle’s — the bulk of it postwar or later, concentrated in subdivisions like Crossroads and Lake Hills that filled in through the 1950s and 1960s, with further growth east toward Eastgate and Newport Hills into the 1970s and beyond. That newer stock leans heavily on factory-built, metal-flue fireplace systems rather than site-built brick masonry, which changes what actually fails: not a cracked crown, but a corroded cap, a failed chase pan or a flue liner overdue for a clean before the burning season.
Neighbourhoods: Crossroads · Wilburton · Lake Hills · Newport Hills
Approximate coverage — call to confirm a specific address.
Services here
What we do in Bellevue
Reviews
What the last 41 customers actually said
5.0
41 Google reviewscounted 2026-08-25
- 541
- 40
- 30
- 20
- 10
Anthony Gill
Water started dripping into our attic during heavy rain so we knew the chimney needed attention fast. Team showed up prepared and diagnosed a completely eroded concrete crown and pulled-away flashing. …
Gregory Phillips
Moved into a new-to-us house in Ballard with a gorgeous brick fireplace but no service history. Scheduled an inspection to be safe. …
Loretta Green
It was important to us to feel safe about our tall chimney after the recent earthquake. The crew carefully checked it out from the inside and the roof. They found some loose cement joints and a crown that was slightly off-center. …
Leona Green
The tech was sweeping the roof from the top down and took images revealing a damaged chimney crown and weak mortar joints on the chase. Clear visual proof, no hard sell!
Questions
What people ask about Bellevue
Do most Bellevue homes have masonry or factory-built chimneys?
It splits by decade. Older pockets near Wilburton and downtown carry masonry fireboxes; the postwar subdivisions and everything built since generally run factory-built metal systems, which is most of what we see on Bellevue calls.
Can you replace a cap on a factory-built chimney, or only on brick?
Both. A factory-built system needs a cap listed for that specific model to keep the manufacturer’s listing and your insurance coverage intact, and we carry the matched parts for the common systems installed across Bellevue.
Does a burn ban in Bellevue work differently than in Seattle?
No. The Puget Sound Clean Air Agency sets burn-ban status for the whole region at once, so a Stage 1 or Stage 2 ban applies to a Bellevue fireplace exactly as it does across the rest of King County.
How often should a Bellevue fireplace be swept?
Annually if it gets regular use, per the same NFPA 211 standard we apply everywhere — a Level 1 inspection alongside the sweep catches most problems before they turn into a repair call.
Do you serve the newer east Bellevue neighborhoods too?
Yes — Eastgate, Newport Hills, Lake Hills and everywhere else in Bellevue sits inside our twenty-mile radius from central Seattle.
Book a visit in Bellevue
Tell us what you have noticed — we will confirm the right service.
Or call (206) 866-2929 — every day, 7 a.m. to 9 p.m.